Jiangsu Yutong Drying Engineering Co. Ltd.

Technology Center

Integrity services 20
Current location:首页 > Technology Center

Contact Us

Jiangsu Yutong Drying Engineering Co. Ltd.
Address:No.68 Shunhe Road, Jiaoxi, Zhenglu Town, Changzhou City, Jiangsu,China 213116
General manager:Luwenguang 13906123780
Deputy general sales:Chayongqiang 13775013377
Tel:0519-88908088 {zzz:tel22}
Foreign trade department:0519-88901088 67892070
Fax:0519-88902649
Website:www.china-yutong.com
Email:yutong@china-yutong.com

Technology Center

Multilayer vibration fluidized bed dryer is a universal type drying equipmen

From:Jiangsu Yutong Drying Engineering Co. Ltd.  time:2016/8/10 5:52:39  hits:

Multilayer vibration fluidized bed dryer is a universal type drying equipment
     Vibration fluidized bed dryer is not only conducive to heat and mass transfer, but also to ensure that the drying device to operate at fairly stable hydrodynamic conditions, as well as easy to produce so easily fluidized or stream a large number of briquettes or highly dispersed material also smooth dry, to overcome the ordinary fluidized bed easy to produce back-mixing, channeling, sticky wall phenomenon, truly be called the ideal plug flow hydrodynamic flow. Vibration fluidized bed dryer is not only conducive to heat and mass transfer, but also to ensure that the drying device to operate at fairly stable hydrodynamic conditions, as well as easy to produce so easily fluidized or stream a large number of briquettes or highly dispersed material also smooth dry, to overcome the ordinary fluidized bed easy to produce back-mixing, channeling, sticky wall phenomenon, truly be called the ideal plug flow hydrodynamic flow.
  Multilayer vibration fluidized bed dryer is a universal type drying equipment, vibration fluidized bed drying single-function multi-material vibration fluidized bed drying can also dry, especially particularly high moisture content of the material, drying time will be able to to the desired moisture content, it is possible to foresee a multilayer vibration fluidized bed has a broad application prospects. Vibration fluidized bed dryer can save energy. As the material is relatively hot air line, full reverse contacts, which compared with the same type of dryer energy saving 30% energy savings of 10%, it dried high quality, good effect. Material horizontal annular diaphragms jumping movement, local overheating and thus uneven drying does not exist. Material crushing rate, less wear, finished moisture content below 0.1%. Vibration fluidized bed dryer investment. Since the multi-layered stack of forms, materials annular vertical movement, so compact, it covers only one-fifth of the same type dryer. And rugged, reliable sealing, easy maintenance, light weight, versatile. Materials motion and flow rate can be adjusted, and thus the raw water is not less than 40%, allowing the temperature does not exceed 400 ℃ powder granular materials are low noise, vibration isolation performance. Can work on a floating floor, installation, displacement is very convenient, good working environment, high production efficiency. When the movement of materials several full contact with the hot air, high thermal efficiency, and thus yield is 2.2 to 3 times per hour, the same type of dryer. 
  Multilayer vibration fluidized bed dryer after the preliminary application in drying the activated carbon, as compared with conventional drying equipment exhibited obvious advantages: energy saving, only activated carbon, for example, than the externally heated rotary cylinder drying section can amount to 50% . Dried strength, small footprint, low investment in equipment. Vibration fluidized bed dryer area is only about two-thirds of single beds, a rotary cylinder 1/2. Reduce product loss typically use activated carbon drying oven drying flat, open drying, artificial stir, the survey charcoal dust only lose 5% -7%. Stainless steel, negative pressure operation, indirect heating, from environmental pollution, products, especially carbon particles from wear, can maintain the integrity of the particles, dust the surface of the carbon particles in the drying is blowing, to improve the clarity of the product. Fine sand products through distribution holes contained falls under the cabinet, thereby reducing the product Asher. Make the product ash fell from 4% to 2.5% or less. Improve the environment, reduce labor intensity of the device only two operations (including burning stove), almost do not see the workshop charcoal dust and secondary dust, dust removal efficiency of more than 99%.


website:


Prev:Jiangsu Yutong Drying Engineering Co., Ltd. won the "working methods of extraction and extraction of dual-use one machine."

Next:Jiangsu Yutong Drying Engineering Co., Ltd. - Engineering Advantage - Chicken Production Line

Jiangsu Yutong Drying Engineering Co. Ltd.
General manager:Luwenguang 13906123780
Deputy general sales:13906123780
Tel:0519-88908088  0519-88908088
Foreign trade department: 0519-88901088 67892070
Fax:0519-88902649
E-mail:yutong@china-yutong.com
Website:www.china-yutong.com
https://czytgz.1688.com/
Address:No.68 Shunhe Road, Jiaoxi, Zhenglu Town, Changzhou City, Jiangsu,China 213116
Scan QR code
Language selection
Chinese
Email    Support:Yunjisuan
Address: No.68 Shunhe Road, Jiaoxi, Zhenglu Town, Changzhou City, Jiangsu,China 213116    General manager:Luwenguang  13906123780    Deputy general sales:Luwenguang  13906123780
Record number :  Sue ICP 15027765     
Copyright:Jiangsu Yutong Drying Engineering Co. Ltd.